SPC Performance 1/4 deg. FORD Camber/Caster Sleeve

Producto SPC Performance original. Importación directa desde EE. UU. con garantía y soporte técnico en Chile.

• Nº de parte: 23101 · Marca: SPC Performance
• Categoría: Suspension
• Carga: 1 caja · 0.2 kg
• Vías de importación: ✈️ Aéreo 2-3 semanas · 🚢 Marítimo 45-60 días
• Garantía: 1 año del fabricante, con respaldo local
• Instalación disponible en nuestro taller de Renca (se cotiza al agendar)

Descripción del fabricante

This sleeve will easily change Camber and/or Caster 0.25˚ for vehicles equipped with twin traction beam DANA 44 axles. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve and install a zero-degree sleeve (23109) to determine the required change, then install the correct degree sleeve. To split camber and caster adjustment, rotate sleeve 45°.

This sleeve will easily change Camber and/or Caster 0.25° for vehicles equipped with twin traction beam DANA 44 axles. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve and install a zero-degree sleeve (23109) to determine the required change, then install the correct degree sleeve. To split camber and caster adjustment, rotate sleeve 45°.

Change camber,caster, or both on twin traction beam Dana 44s with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Unstall zero degree sleeve 23109 to determine the change needed, then install the correct sleeve. To split camber and caster adjustment, rotate sleeve 45deg. California Residents WARNING

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.