SPC Performance 4X4 Camber/Caster Sleeve SET

Producto SPC Performance original. Importación directa desde EE. UU. con garantía y soporte técnico en Chile.

• Nº de parte: 23100 · Marca: SPC Performance
• Categoría: Suspension
• Carga: 1 caja · 1.8 kg
• Vías de importación: ✈️ Aéreo 2-3 semanas · 🚢 Marítimo 45-60 días
• Garantía: 1 año del fabricante, con respaldo local
• Instalación disponible en nuestro taller de Renca (se cotiza al agendar)

Descripción del fabricante

Change camber,caster, or both on twin traction beam Dana 44s with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Unstall zero degree sleeve 23109 to determine the change needed, then install the correct sleeve. To split camber and caster adjustment, rotate sleeve 45deg. Set 23100 contaings 1 each: 23101, 23102, 23103, 23104, 23105, 23106, 23107, 23108, 23109 California Residents WARNING

Change camber, caster, or both on twin traction beam Dana 44s with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero-degree sleeve (23109) to determine the change needed, then install the correct sleeve. To split camber and caster adjustment, rotate sleeve 45°. Set 23100 contains 1 each: 23101, 23102, 23103, 23104, 23105, 23106, 23107, 23108, 23109

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Front Adjustment Range: Camber/Caster ±0.25° to ±2.75°with additional series sleeves